Stranda Insulated Hybrid Anorak

Solution Dyeing is a more sustainable coloring method which reduces the environmental impact compared to traditional dyeing processes. By adding the color pigments much earlier in the production process the use of water and chemicals is significantly reduced, which in turn means less energy consumption and a smaller carbon footprint. For traditional dyeing methods the fiber is produced first and then the color is added much later in the process. This requires a lot of water and chemicals, which means energy and water consumption is much higher. Solution dyeing means adding the color pigment earlier in the manufacturing process, when the polyester is just little pellets. Once these pellets are colored, they are melted and turned into fibers, which are then spun into yarn. According to our supplier We aRe Spindye® their method of coloring reduces water usage by 75%, chemical usage by 90%, energy consumption by 25% and CO2 emissions by 30% compared to traditional dyeing. These claims have been audited and validated by Swedish research organization RISE.

Read more here SpinDye.com

Bergans products with water-repellent functionality have no intentionally added PFAS in the surface treatment. PFAS (per- and polyfluoroalkyl substances) are a large group of chemicals that have traditionally been widely used in water-repellent DWR (Durable Water Repellent) treatments. The treatment causes water and dirt to bead up and roll off the surface rather than penetrate the fabric. PFAS break down very slowly in the environment and are therefore often referred to as “forever chemicals”. They can accumulate over time, both in the environment and in living organisms, and several PFAS compounds have been shown to pose a risk to human health and the environment. Since 2016, Bergans has been actively working to phase out PFAS-containing substances from our products and replace them with PFAS-free treatments. All membranes we use are already PFAS-free. The water-repellent performance of the outer fabric will gradually diminish with use. As a result, the outer fabric may absorb more moisture, which can reduce breathability and comfort – even though the garment remains waterproof. To maintain the garment’s performance over time, we recommend regular washing and re-impregnate when needed. Read more about how to wash and re-impregnate your garment here.

Fully windproof and waterproof, while providing high breathability and comfort.

Designed for moderate to high-intensity activity in extreme weather conditions

• Wind and waterproof
• Withstands a water column of minimum 10.000 mm
• Moisture transportation up to 10.000 g/m²/24 hours
• Machine washable following carelabel

RECCO® is a maintenance-free reflector which helps search and rescue crews during searches for people who have been caught in an avalanche. At Bergans we have chosen to sew in a RECCO® search reflector in some of our products. This neither guarantees that you will be found, nor that you will not be caught in an avalanche. But where a RECCO® searcher is in place, the reflector on the garments can be of good help for search and rescue crews. The RECCO® reflector is maintenance-free and does not require activation. It functions as a transporter of radio waves, cannot activate alarm systems, and will not be destroyed by de-magnetization.