Fløyen W Jacket
Overview
Made for
- Fast Hiking
Also great for
- Hiking
Details
Sizes: XS-XL
Weight: 205 g (Size M)
Fiber Content: Fabric 1: Stunner®Stretch: 100% Polyamide (Nylon) Fabric 2: 87% Recycled Polyester/13% Elastane
Fabric details: Lightweight, windproof and water-repellent softshell with PFAS-free WR. The fabric has 2-way stretch, excellent breathability and is quick-drying. Low weight and minimal packing volume. The product contains bluesign® APPROVED fabrics and trimmings.
Hood: None.
Pockets: Front pockets in mesh for optimal breathability and ventilation. Integrated compression pocket that can be attached as a hip belt, with pocket.
Ventilation: Bonded overlap ventilation with mesh on the upper part of the back, and through open pockets.
Additional features: The shoulder seams are staggered to prevent wear and tear and increase comfort when carrying a backpack. Extended back. Mesh at the collar. Articulated elbows for increased freedom of movement. Tailored cuffs with elastic. Reflective details. One-hand elastic drawstring at hem.
Materials and Certifications
- PFAS-free
- PFAS-free
PFAS-free
Bergans products with water-repellent functionality have no intentionally added PFAS in the surface treatment. PFAS (per- and polyfluoroalkyl substances) are a large group of chemicals that have traditionally been widely used in water-repellent DWR (Durable Water Repellent) treatments. The treatment causes water and dirt to bead up and roll off the surface rather than penetrate the fabric. PFAS break down very slowly in the environment and are therefore often referred to as “forever chemicals”. They can accumulate over time, both in the environment and in living organisms, and several PFAS compounds have been shown to pose a risk to human health and the environment. Since 2016, Bergans has been actively working to phase out PFAS-containing substances from our products and replace them with PFAS-free treatments. All membranes we use are already PFAS-free. The water-repellent performance of the outer fabric will gradually diminish with use. As a result, the outer fabric may absorb more moisture, which can reduce breathability and comfort – even though the garment remains waterproof. To maintain the garment’s performance over time, we recommend regular washing and re-impregnate when needed. Read more about how to wash and re-impregnate your garment here.
Size and fit guide
Slim fit
A body-hugging fit that follows the curves of the body.
Select the size you would like to view the measurements for.
How to measure

A - Bust: Measured with arms hanging straight down by your sides. If you're buying a jacket/top, this is the most important measurement.
B - Waist: Measured at the narrowest point.
C - Hips: Measured at the widest point. If you're buying pants/bottoms, this is the most important measurement.
E - Sleeve length: Measure from the shoulder, over the elbow, to the wrist with the arm slightly bent.
It can be difficult to measure yourself properly, so it's a good idea to get help from someone else. Tip: If you don't have a measuring tape, you can use a piece of thread or string, and then measure it with a ruler afterward.
In cases where the chart shows different sizes fitting different parts of the body, which is very common, you are the best person to decide which priority to give. It's also important to consider whether you prefer a slim or loose fit if you're between two sizes.