Røros Down Hybrid W Jacket
Overview
Made for
- Hiking
Details
Sizes: XS-XL
Fit: Regular fit. The fit of this garment was developed specially for use with layered clothing. This means it offers good freedom of movementt, even over mid-layer garments.
Padding: PrimaLoft Silver Eco: 100% Polyester(70% Recycled)
Padding weight: 80 gr/m2
Down: RE:DOWN. 90/10 Fill volume: 700 cuin. Stitched Through.
Down fill weight: 100 gr/m2
Weight: 490 g (Size S)
Fiber Content: 100% Polyester
Fabric details: Windproof and water repellent fabric with PFAS-Free WR. Padded with 90/10 Recycled down on exposed sections like front, back, top of sleeves and hood. Padded with Primaloft Silver Eco where you need more ventilation like under sleeves, in side panels and on shoulders. Product contains bluesign® APPROVED fabrics, insulation and trimmings. Since down is a natural material, there will inevitably be some variations in color. On some of our down products, the darkest downs can sometimes be visible through the fabric.
Hood: Fixed, pre-shaped hood with cord adjustment in the back.
Pockets: Zippered front pockets. Zippered inner pocket. Left front pocket can also be used as compression pocket.
Ventilation: None.
Additional features: Elastic sleeve cuffs. Articulated elbows for increased freedom of movement. Elastic drawstring at hem. No side seam for less friction and chafing. The shoulder and side seams are staggered backwards to prevent wear and tear and increase comfort when carrying a backpack. Extended back.
Materials and Certifications
- Re:Down
- PFAS-free
- Re:Down
- PFAS-free
ReDown
Re:Down has developed a method which enables used down to be collected, cleaned and reused in textile production. Re:Down is 100% recycled down from used clothing and bed linen which is sorted, washed and then sterilized. The collection and production of Re:Down takes place via the use of a carefully controlled system, which utilizes and recycles all parts of the collected goods and is certified in accordance with the Global Recycled Standard (GRS). Re:Down uses a blend of goose and duck down and has the same excellent properties as new down. It helps to reduce waste and improve the utilization of natural resources. Because Re:Down is not sourced from live animals, it also cannot be certified in accordance with the Responsible Down Standard (RDS).
Read more at re-down.com
PFAS-free
Bergans products with water-repellent functionality have no intentionally added PFAS in the surface treatment. PFAS (per- and polyfluoroalkyl substances) are a large group of chemicals that have traditionally been widely used in water-repellent DWR (Durable Water Repellent) treatments. The treatment causes water and dirt to bead up and roll off the surface rather than penetrate the fabric. PFAS break down very slowly in the environment and are therefore often referred to as “forever chemicals”. They can accumulate over time, both in the environment and in living organisms, and several PFAS compounds have been shown to pose a risk to human health and the environment. Since 2016, Bergans has been actively working to phase out PFAS-containing substances from our products and replace them with PFAS-free treatments. All membranes we use are already PFAS-free. The water-repellent performance of the outer fabric will gradually diminish with use. As a result, the outer fabric may absorb more moisture, which can reduce breathability and comfort – even though the garment remains waterproof. To maintain the garment’s performance over time, we recommend regular washing and re-impregnate when needed. Read more about how to wash and re-impregnate your garment here.
Size and fit guide
Regular fit
Standard, classic fit. It doesn't stand out as either tight-fitting or loose.
Select the size you would like to view the measurements for.
How to measure

A - Bust: Measured with arms hanging straight down by your sides. If you're buying a jacket/top, this is the most important measurement.
B - Waist: Measured at the narrowest point.
C - Hips: Measured at the widest point. If you're buying pants/bottoms, this is the most important measurement.
E - Sleeve length: Measure from the shoulder, over the elbow, to the wrist with the arm slightly bent.
It can be difficult to measure yourself properly, so it's a good idea to get help from someone else. Tip: If you don't have a measuring tape, you can use a piece of thread or string, and then measure it with a ruler afterward.
In cases where the chart shows different sizes fitting different parts of the body, which is very common, you are the best person to decide which priority to give. It's also important to consider whether you prefer a slim or loose fit if you're between two sizes.