Stranda V2 Insulated Anorak
Overview
Made for
- Ski
Details
Sizes: XXS–XXL (Because this is a unisex model, we recommend that women drop down one size from their normal size. If you want an oversized look, choose your normal size)
Fit: Unisex
Padding: PrimaLoft® P.U.R.E.™: 100% Polyester (Recycled)
Padding weight: 60 gr/m2
Weight: 780 g
Fiber Content: 2-layer Bergans Element Active®: 100% Polyester (Recycled)
Fabric details: 2-layer Bergans Element Active® with PFAS-free WR. Waterproof (water column: min. 10,000 mm), windproof and breathable properties. Fabric is made from 100% recycled polyester and colored with SpinDye®-technology. Padded with insulating PrimaLoft® P.U.R.E.™. The product contains bluesign® APPROVED insulation and trimmings.
Stranda V2 Insulated Anorak is part of our Stranda range – Our most sustainable ski collection. The entire Stranda collection is made from one yarn, spun from post-consumer waste and colored through the unique SpinDye® process where the use of water and chemicals is significantly reduced. This gives us less consumption of energy during production and leaves the end product with a smaller carbon footprint. By combining the more sustainable Spindye®-coloring method and our wide experience in skiwear, we believe we have found the optimal blend of performance and long-term awesomeness!
Hood: Helmet-compatible, fixed hood. One-hand adjustment options at the rear of the hood and concealed adjustment in front. Expandable, high collar with snap button, for improved ventilation and comfort.
Pockets: Large, zippered front pockets, small insulated inner pocket inside one of the front pockets, and ski pass pocket on the sleeve. The design ensures that front pockets do not interfere with hip belt when carrying a backpack.
Ventilation: Underarm zip vents. On one side the zipper runs all the way down, to facilitate easy taking on and off.
Additional features: Snowskirt. Articulated elbows for increased freedom of movement. Tailored cuffs with Velcro. One-hand elastic drawstring at hem. No shoulder and side seams for less friction and chafing. Straight athletic fit with extended back panel.
Materials and Certifications
- Solution Dye
- PFAS-free
- Solution Dye
- PFAS-free
Solution Dye
Solution Dyeing is a more sustainable coloring method which reduces the environmental impact compared to traditional dyeing processes. By adding the color pigments much earlier in the production process the use of water and chemicals is significantly reduced, which in turn means less energy consumption and a smaller carbon footprint. For traditional dyeing methods the fiber is produced first and then the color is added much later in the process. This requires a lot of water and chemicals, which means energy and water consumption is much higher. Solution dyeing means adding the color pigment earlier in the manufacturing process, when the polyester is just little pellets. Once these pellets are colored, they are melted and turned into fibers, which are then spun into yarn. According to our supplier We aRe Spindye® their method of coloring reduces water usage by 75%, chemical usage by 90%, energy consumption by 25% and CO2 emissions by 30% compared to traditional dyeing. These claims have been audited and validated by Swedish research organization RISE.
Read more here SpinDye.com
PFAS-free
Bergans products with water-repellent functionality have no intentionally added PFAS in the surface treatment. PFAS (per- and polyfluoroalkyl substances) are a large group of chemicals that have traditionally been widely used in water-repellent DWR (Durable Water Repellent) treatments. The treatment causes water and dirt to bead up and roll off the surface rather than penetrate the fabric. PFAS break down very slowly in the environment and are therefore often referred to as “forever chemicals”. They can accumulate over time, both in the environment and in living organisms, and several PFAS compounds have been shown to pose a risk to human health and the environment. Since 2016, Bergans has been actively working to phase out PFAS-containing substances from our products and replace them with PFAS-free treatments. All membranes we use are already PFAS-free. The water-repellent performance of the outer fabric will gradually diminish with use. As a result, the outer fabric may absorb more moisture, which can reduce breathability and comfort – even though the garment remains waterproof. To maintain the garment’s performance over time, we recommend regular washing and re-impregnate when needed. Read more about how to wash and re-impregnate your garment here.
Technologies
- Bergans Element Active
- Bergans Element Active
Bergans Element Active
Fully windproof and waterproof, while providing high breathability and comfort.
Designed for moderate to high-intensity activity in extreme weather conditions
- Wind and waterproof
- Withstands a water column of minimum 10.000 mm
- Moisture transportation up to 10.000 g/m²/24 hours
- Machine washable following carelabel
Stranda
Size and fit guide
Select the size you would like to view the measurements for.
How to measure
A - Bust: Measured with arms hanging straight down by your sides. If you're buying a jacket/top, this is the most important measurement.
B - Waist: Measured at the narrowest point.
C - Hips: Measured at the widest point. If you're buying pants/bottoms, this is the most important measurement.
E - Sleeve length: Measure from the shoulder, over the elbow, to the wrist with the arm slightly bent.
It can be difficult to measure yourself properly, so it's a good idea to get help from someone else. Tip: If you don't have a measuring tape, you can use a piece of thread or string, and then measure it with a ruler afterward.
In cases where the chart shows different sizes fitting different parts of the body, which is very common, you are the best person to decide which priority to give. It's also important to consider whether you prefer a slim or loose fit if you're between two sizes.