Rabot Softshell Pants Men
Overview
Made for
- Hiking
Details
Sizes: 46–58 (44-62 and Long / Short length in Black)
Fit: Slim fit.
Weight: 375 g (Size E54)
Fiber Content: Fabric 1: 85% Polyamide (Recycled), 15% Elastane Fabric 2: 88% Polyamide (Recycled), 12% Elastane
Fabric details: Combines two stretchy and durable softshell fabrics in recycled Polyamide, both with PFAS-free WR. A wind and water-resistant fabric is placed on exposed areas like in the seat and from the thigh area and down, and a breathable and wicking fabric is placed on the backside of the legs and the top front. Product contains bluesign® APPROVED fabrics and trimmings.
Rabot Softshell Pants is part of the Rabot Collection – A line of highly technical hiking clothing that enables you to experience nature year-round regardless of the weather conditions. Rabot V2 is characterized by light and packable products designed with breathability and layering in mind. The products provide next level comfort and a soft touch and feel. As always, our designers have chosen the most sustainable materials and trims possible, without compromising on durability. Get ready to get out there. Rabot V2 is here to protect and perform!
Pockets: Zippered hand pockets and thigh pockets. Loop inside one of the thigh pockets. Left thigh pocket also works as a compression pocket.
Ventilation: None. Breathable by construction.
Additional features: Preadjusted, elastic waist. Belt loops. Articulated knee sections. Reinforcement at bottom leg. Zippered bottom hem with gusset and snap buttons for adjustment of bottom hem width, to fit larger hiking boots. Panel construction in crotch for less friction and chafing at thigh area.
Materials and Certifications
- PFAS-free
- PFAS-free
PFAS-free
Bergans products with water-repellent functionality have no intentionally added PFAS in the surface treatment. PFAS (per- and polyfluoroalkyl substances) are a large group of chemicals that have traditionally been widely used in water-repellent DWR (Durable Water Repellent) treatments. The treatment causes water and dirt to bead up and roll off the surface rather than penetrate the fabric. PFAS break down very slowly in the environment and are therefore often referred to as “forever chemicals”. They can accumulate over time, both in the environment and in living organisms, and several PFAS compounds have been shown to pose a risk to human health and the environment. Since 2016, Bergans has been actively working to phase out PFAS-containing substances from our products and replace them with PFAS-free treatments. All membranes we use are already PFAS-free. The water-repellent performance of the outer fabric will gradually diminish with use. As a result, the outer fabric may absorb more moisture, which can reduce breathability and comfort – even though the garment remains waterproof. To maintain the garment’s performance over time, we recommend regular washing and re-impregnate when needed. Read more about how to wash and re-impregnate your garment here.
Rabot
Size and fit guide
Slim fit
A body-hugging fit that follows the curves of the body.
Select the size you would like to view the measurements for.
How to measure
C - Hips: Measured at the widest point. If you're buying pants/bottoms, this is the most important measurement.
D - Inseam: Measured on the inside, from the crotch down to the floor.
It can be difficult to measure yourself properly, so it's a good idea to get help from someone else. Tip: If you don't have a measuring tape, you can use a piece of thread or string, and then measure it with a ruler afterward.
In cases where the chart shows different sizes fitting different parts of the body, which is very common, you are the best person to decide which priority to give. It's also important to consider whether you prefer a slim or loose fit if you're between two sizes.